10 Awesome Accessories for the Baofeng Radio

The 10 Most Awesome Accessories for the Baofeng Radio

Let’s face it… The Baofeng series of Amateur radios are here to stay and have made a huge splash in the Ham Radio, preparedness and emergency response communities.  For the price, these are the best value and quality radio’s that can be had.

There are a lot of accessories for the Baofeng radios at excellent prices. Here are my favorites:

USB Programming Cable

The USB programming cable is a MUST. This is the only way to program alpha numeric names into the radio. It comes with software, but I recommend the open source CHIRP software. CHIRP supports many brands and models of radios and allows you to easily copy settings from one radio to another.

CHIRP can be downloaded from http://chirp.danplanet.com/projects/chirp/wiki/Home.  It is excellent software and supports Baofeng, Wouxon, Yeasu, Alinco, Icom, Kenwood, TYT and many other brands of radios.  Since CHIRP is open source software, it is free.  If you are a programmer, you can even contribute bug fixes to the codebase.  This is a great way to contribute to the community.

Handheld Speaker / Microphone

Many folks who have owned a walkie talkie, FRS radio or handheld two-way business band radio will tell you that a handheld speaker/mic is a must have accessory for a radio.  The speaker/mic allows you to mount the radio OUT OF THE WAY in your backpack, fannypack, belt clip or tactical vest.

Using a speaker/mic also protects the radio from accidental drops since you are only using the mic and not unclipping and reclipping the radio.  You can also clip the mic to your shoulder strap or shirt for convenience.  It’s a pretty nice accessory and while not fully necessary, it does make the radio a lot more usable.

The radio does include an earpiece speaker/microphone, but I have found that embedding a 2-way speaker in the ear can be irritating while working.

USB Charging Adapter

Perhaps one of the best accessories for the Baofeng radio is the USB charging adapter. This adapter plugs directly into the radio charging dock. With the USB adapter, you can even charge your radio from a desktop or laptop computer.
Since most vehicles now have USB ports, you can charge the radio directly from the vehicles USB power. This means that you no longer need a 120v power inverter in your car, just to charge your radio.

High Capacity Battery

The high capacity battery offers significantly more operating time than the stock battery.  With 3800 mAH of capacity, this battery pack brings almost double the original 1800 mAH capacity.  While the original battery pack provides great service life, the extended pack is a nice addition to your kit.

Battery Eliminator (Car adapter)

A battery eliminator / car adapter is a great idea, especially if you are spending a lot of time in the car. It plugs into the radio in place of the battery.  The battery eliminator can even be used on an ATV or UTV vehicle since it plugs into a standard 12v DC socket.

In addition to saving your battery when in a vehicle, this option can also be very useful for a remote cabin or a house that is powered from a 12v solar array or that has 12v battery backups.  In an emergency situation, where only a car battery is available, this option may come in very handy.

For a stationary digipeater or packet radio node, this accessory would provide a nice solution that allows the radio to be powered from a large capacity battery.  The radio should be turned off prior to removing the battery pack and replacing it with the battery eliminator.

High performance antenna

Some reviewers say that the included antenna is not that good. They are probably right, but I have not yet verified their claim. In any case, it is pretty typical in my experience that the antenna included with any handheld ham radio is usually not that great. Upgrading the stock antenna to a higher performance antenna can make a HUGE difference in operating distance and clarity.

With the stock antenna, I have been able to barely access a mountain-top repeater from 30 miles away. There is a lot of noise with the stock antenna and the signal is not that great. With the upgraded antenna, the repeater comes in loud and clear.

Antenna Extension Cable

An antenna extension cable allows the radio to be separated from the antenna. With this setup, it is simple to place the radio body in an internal backpack pocket and route the antenna outside of the pack. The extension cable can also be used to locate the radio in a locked cabinet with the antenna mounted in a good location outside of the cabinet.

The cable has an SMA-Female that screws onto the radio body and an SMA-Male that screws into the bottom of the antenna.  This cable can be used with the excellent Nogoya NA-771 whip antenna or with the stock antenna that comes with the radio.


Mobile Antenna

The mobile antenna mounts to any metal object via a magnetic base. This is a great option which provides a solid mount on a vehicle. The antenna is dual-band, meaning that it is tuned for both the 2m and 70cm ham radio bands.

As with any mobile antenna, it is important to ensure that there is a good ground plane. Typically, this means that the antenna should be mounted in the center of a flat cheet of metal. On a vehicle, the simplest location is often the roof of the car or truck. On an ATV or UTV, getting a good ground plane may be a bit more difficult as there are rarely large, flat metal surfaces.

If there is no metal surface to mount the antenna on, it is simple to use a 2″ x 2″ piece of steel angle mounted to the frame of the ATV/UTV and then attach the magnet mount to the horizontal side of the angle.



PL-259 Adapter Cable

If you have a high performance mobile or base station antenna, you may want to connect your radio directly to that antenna. This adapter cable allows you to directly connect your Baofeng radio to the antenna.

Pretty simple.



Radio Pouch

While backpacking, it’s nice to have the radio secured in a pouch on the outside of the pack. This pouch fits the Baofeng UV-5R series of radios perfectly. The pouch has a solid MOLLE strap on the back which securely attaches to any standard MOLLE setup. The MOLLE strap can also attach to a belt. The pouch holds the radio via a strong velcro flap that provides enough space for the antenna and the remote speaker/mic cable.

This is a great accessory and one that I keep the radio in all of the time.

Powered by http://wordpress.org/ and http://www.hqpremiumthemes.com/